|
|
| 11815.1 |
1-End Wall Panel 24 x 3.5 - 18 |
End Wall Panel for Quonset Hut Structures, 18 Gauge Minimum |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +49.2/-61.5
Other: Refer to evaluation report for conditions and limitations of use. Refer to manufacturer's installation instructions as a supplemental guide for attachment. |
Installation Instructions
FL11815_R6_II_1_23-604.1_EndWallPanel-18Ga-S8S-ER-ds.pdf
Verified By: James L. Buckner, P.E. @CBUCK, Inc P.E. #31242
Created by Independent Third Party: Yes
Evaluation Reports
FL11815_R6_AE_1_23-604.1_EndWallPanel-18Ga-S8S-ER-ds.pdf
Created by Independent Third Party: Yes |
|
|
| 11815.2 |
2-End Wall Panel 24 x 3.5 - 20 |
End Wall Panel for Quonset Hut Structures, 20 Gauge Minimum |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +40.8/-51.0
Other: Refer to evaluation report for conditions and limitations of use. Refer to manufacturer's installation instructions as a supplemental guide for attachment. |
Installation Instructions
FL11815_R6_II_2_23-604.2_EndWallPanel-20Ga-S8S-ER-ds.pdf
Verified By: James L. Buckner, P.E. @CBUCK, Inc P.E. #31242
Created by Independent Third Party: Yes
Evaluation Reports
FL11815_R6_AE_2_23-604.2_EndWallPanel-20Ga-S8S-ER-ds.pdf
Created by Independent Third Party: Yes |
|
|
| 11815.3 |
3-End Wall Panel 24 x 3.5 - 22 |
End Wall Panel for Quonset Hut Structures, 22 Gauge Minimum |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +23.4/-29.2
Other: Refer to evaluation report for conditions and limitations of use. Refer to manufacturer's installation instructions as a supplemental guide for attachment. |
Installation Instructions
FL11815_R6_II_3_23-604.3_EndWallPanel-22Ga-S2S-ER-ds.pdf
Verified By: James L. Buckner, P.E. @CBUCK, Inc P.E. #31242
Created by Independent Third Party: Yes
Evaluation Reports
FL11815_R6_AE_3_23-604.3_EndWallPanel-22Ga-S2S-ER-ds.pdf
Created by Independent Third Party: Yes |
|
|
| 11815.4 |
3-End Wall Panel 24 x 3.5 - 23 |
End Wall Panel for Quonset Hut Structures, 23 Gauge Minimum |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +13/-16
Other: Refer to evaluation report for conditions and limitations of use. Refer to manufacturer's installation instructions as a supplemental guide for attachment. |
Installation Instructions
FL11815_R6_II_4_23-604.4_EndWallPanel-23Ga-S3S-ER-ds.pdf
Verified By: James L. Buckner, P.E. @ CBUCK, Inc. P.E. #31242
Created by Independent Third Party: Yes
Evaluation Reports
FL11815_R6_AE_4_23-604.4_EndWallPanel-23Ga-S3S-ER-ds.pdf
Created by Independent Third Party: Yes |
