|
|
| 5678.1 |
01 W4-09 C-DSIE-1F173: 3201, 3203, 250, 250G |
Double-skin Insulated (exterior skin 27 ga. min.; interior skin 27 ga. min.) WINDCODE® W4 Sectional Door, up to 9’0” wide |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +28 PSF/-29 PSF
Other: The OPTIONAL glazing available for this product meets the wind load requirements of the building code but DOES NOT meet the impact resistant requirement for windborne debris regions. The product without glazing DOES comply with the impact resistant requirement for windborne debris regions (ref 1609.1.4 FBC). |
Installation Instructions
FL5678_R8_II_101758-Rev10.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_CCER_230725.pdf
Created by Independent Third Party: No |
|
|
| 5678.2 |
02 W4-16 C-DSIE-1F173: 3201, 3203, 250, 250G |
Double-skin Insulated (exterior skin 27 ga. min.; interior skin 27 ga. min.) WINDCODE® W4 Sectional Door, 9’2” to 16’0” wide
|
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +25.5 PSF/-25.5 PSF
Other: The OPTIONAL glazing available for this product meets the wind load requirements of the building code but DOES NOT meet the impact resistant requirement for windborne debris regions. The product without glazing DOES comply with the impact resistant requirement for windborne debris regions (ref 1609.1.4 FBC). |
Installation Instructions
FL5678_R8_II_101760-Rev08.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_CCER_230725.pdf
Created by Independent Third Party: No |
|
|
| 5678.3 |
03 W4-09 C-PAN-2F141: 692, 652V |
Steel Pan (min. 24 ga.) WINDCODE® W4 Sectional Door, up to 9’0” wide
|
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +25 PSF/-32 PSF
Other: The OPTIONAL glazing available for this product meets the wind load requirements of the building code but DOES NOT meet the impact resistant requirement for windborne debris regions. The product without glazing DOES comply with the impact resistant requirement for windborne debris regions (ref 1609.1.4 FBC). |
Installation Instructions
FL5678_R8_II_101762-Rev10_s.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_CCER_230725.pdf
Created by Independent Third Party: No |
|
|
| 5678.4 |
04 W4-16 C-PAN-2F141: 692, 652V |
Steel Pan (min. 24 ga.) WINDCODE® W4 Sectional Door, 9’2” to 16’0” wide
|
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +24 PSF/-24.5 PSF
Other: The OPTIONAL glazing available for this product meets the wind load requirements of the building code but DOES NOT meet the impact resistant requirement for windborne debris regions. The product without glazing DOES comply with the impact resistant requirement for windborne debris regions (ref 1609.1.4 FBC). |
Installation Instructions
FL5678_R8_II_101781-Rev09.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_CCER_230725.pdf
Created by Independent Third Party: No |
|
|
| 5678.5 |
05 W4-12 C-DSIE-1F447: 3200, 3220, 240, 240G |
Double-skin Insulated (exterior skin 24 ga. min.; interior skin 27 ga. min.) WINDCODE® W4 Sectional Door, up to 10’2” wide
|
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +25 PSF/-28 PSF
Other: The OPTIONAL glazing available for this product meets the wind load requirements of the building code but DOES NOT meet the impact resistant requirement for windborne debris regions. The product without glazing DOES comply with the impact resistant requirement for windborne debris regions (ref 1609.1.4 FBC).
|
Installation Instructions
FL5678_R8_II_101687-Rev11.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_CCER_230725.pdf
Created by Independent Third Party: No |
|
|
| 5678.6 |
06 W4-20 C-DSIE-1F447: 3200, 3220, 240, 240G |
Double-skin Insulated (exterior skin 24 ga. min.; interior skin 27 ga. min.) WINDCODE® W4 Sectional Door, 10’4” to 20’2” wide
|
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +25 PSF/-28 PSF
Other: The OPTIONAL glazing available for this product meets the wind load requirements of the building code but DOES NOT meet the impact resistant requirement for windborne debris regions. The product without glazing DOES comply with the impact resistant requirement for windborne debris regions (ref 1609.1.4 FBC).
|
Installation Instructions
FL5678_R8_II_DISCONTINUED_FL5678.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_DISCONTINUED_FL5678.pdf
Created by Independent Third Party: No |
|
|
| 5678.7 |
07 W4-24 C-DSIE-1F447: 3200, 3220, 240, 240G |
Double-skin Insulated (exterior skin 24 ga. min.; interior skin 27 ga. min.) WINDCODE® W4 Sectional Door, 20’4” to 24’2” wide
|
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +25 PSF/-25 PSF
Other: This Clopay Garage Door with C-channel reinforcements has been discontinued and replaced by a version with T-strut reinforcements.
Contact Clopay customer service for T-strut Approval Numbers and Drawings.
|
Installation Instructions
FL5678_R8_II_DISCONTINUED_FL5678.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_DISCONTINUED_FL5678.pdf
Created by Independent Third Party: No |
|
|
| 5678.8 |
08 W4-10 C-DSIU-1D477: 3717, C7X17, 3718, C7X18, 3720, C7X20, 240U, 3722, C0X22 |
Double-skin Insulated (exterior skin 27 ga. min.; interior skin 27 ga. min.) WINDCODE® W4 Sectional Door, up to 10’2” wide
|
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +25 PSF/-25 PSF
Other: The OPTIONAL glazing available for this product meets the wind load requirements of the building code but DOES NOT meet the impact resistant requirement for windborne debris regions. The product without glazing DOES comply with the impact resistant requirement for windborne debris regions (ref 1609.1.4 FBC).
|
Installation Instructions
FL5678_R8_II_104040-Rev05.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_CCER_230725.pdf
Created by Independent Third Party: No |
|
|
| 5678.9 |
09 W4-12 C-PAN-1E458: 525, 525V, 525S, 524, 524V, 524S, 520, 520S, 225, 225S, 224, 224S, C5EST, C5ST, C5ESV, C5SV, C5ESS, C5SS, C4ST C4SV, C4SS, C0ST, C0SS |
Ribbed Steel (min. 25 ga.) WINDCODE® W4 Sectional Door, up to 12’2” wide
|
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +25 PSF/-25 PSF
Other: The OPTIONAL glazing available for this product meets the wind load requirements of the building code but DOES NOT meet the impact resistant requirement for windborne debris regions. The product without glazing DOES comply with the impact resistant requirement for windborne debris regions (ref 1609.1.4 FBC).
|
Installation Instructions
FL5678_R8_II_101856-Rev13.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_CCER_230725.pdf
Created by Independent Third Party: No |
|
|
| 5678.10 |
10 W4-16 C-PAN-1E448: 524, 524V, 524S, 520, 520S, 224, 224S, C4ST C4SV, C4SS, C0ST, C0SS |
Ribbed Steel (min. 24 ga.) WINDCODE® W4 Sectional Door, 12’4” to 16’2” wide
|
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +25 PSF/-25 PSF
Other: The OPTIONAL glazing available for this product meets the wind load requirements of the building code but DOES NOT meet the impact resistant requirement for windborne debris regions. The product without glazing DOES comply with the impact resistant requirement for windborne debris regions (ref 1609.1.4 FBC).
|
Installation Instructions
FL5678_R8_II_DISCONTINUED_FL5678.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_DISCONTINUED_FL5678.pdf
Created by Independent Third Party: No |
|
|
| 5678.11 |
11 W4-20 C-PAN-1E448: 524, 524V, 524S, 520, 520S, 224, 224S, C4ST C4SV, C4SS, C0ST, C0SS |
Ribbed Steel (min. 24 ga.) WINDCODE® W4 Sectional Door, 16’4” to 20’2” wide
|
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +25 PSF/-25 PSF
Other: The OPTIONAL glazing available for this product meets the wind load requirements of the building code but DOES NOT meet the impact resistant requirement for windborne debris regions. The product without glazing DOES comply with the impact resistant requirement for windborne debris regions (ref 1609.1.4 FBC).
|
Installation Instructions
FL5678_R8_II_DISCONTINUED_FL5678.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_DISCONTINUED_FL5678.pdf
Created by Independent Third Party: No |
|
|
| 5678.12 |
12 W4-24 C-PAN-1E448: 524, 524V, 524S, 520, 520S, 224, 224S, C4ST C4SV, C4SS, C0ST, C0SS |
Ribbed Steel (min. 24 ga.) WINDCODE® W4 Sectional Door, 20’4” to 24’2” wide
|
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +25 PSF/-25 PSF
Other: This Clopay Garage Door with C-channel reinforcements has been discontinued and replaced by a version with T-strut reinforcements.
Contact Clopay customer service for T-strut Approval Numbers and Drawings.
|
Installation Instructions
FL5678_R8_II_DISCONTINUED_FL5678.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_DISCONTINUED_FL5678.pdf
Created by Independent Third Party: No |
|
|
| 5678.13 |
13 W4-24 C-AL-1F499: 902, 903, C2AL, C3AL |
Service Station WINDCODE® W4 Sectional Door, up to 24’2” wide
|
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +25 PSF/-25 PSF
Other: This Clopay Garage Door with C-channel reinforcements has been discontinued and replaced by a version with T-strut reinforcements.
Contact Clopay customer service for T-strut Approval Numbers and Drawings.
|
Installation Instructions
FL5678_R8_II_DISCONTINUED_FL5678.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_DISCONTINUED_FL5678.pdf
Created by Independent Third Party: No |
|
|
| 5678.14 |
14 W5-16 C-DSIE-1F447: 3200, 3220, 240, 240G |
Double-skin Insulated (exterior skin 24 ga. min.; interior skin 27 ga. min.) WINDCODE® W5 Sectional Door, up to 16’2” wide
|
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +30 PSF/-32 PSF
Other: The OPTIONAL glazing available for this product meets the wind load requirements of the building code but DOES NOT meet the impact resistant requirement for windborne debris regions. The product without glazing DOES comply with the impact resistant requirement for windborne debris regions (ref 1609.1.4 FBC).
|
Installation Instructions
FL5678_R8_II_200040-Rev15.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_CCER_230725.pdf
Created by Independent Third Party: No |
|
|
| 5678.15 |
15 W5-22 C-DSIE-1F447: 3200, 3220, 240, 240G |
Double-skin Insulated (exterior skin 24 ga. min.; interior skin 27 ga. min.) WINDCODE® W5 Sectional Door, 16’4” to 22’2” wide
|
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +30 PSF/-30 PSF
Other: This Clopay Garage Door with C-channel reinforcements has been discontinued and replaced by a version with T-strut reinforcements.
Contact Clopay customer service for T-strut Approval Numbers and Drawings.
|
Installation Instructions
FL5678_R8_II_DISCONTINUED_FL5678.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_DISCONTINUED_FL5678.pdf
Created by Independent Third Party: No |
|
|
| 5678.16 |
16 W5-14 C-DSIU-1D477: 3717, C7X17, 3718, C7X18, 3720, C7X20, 240U, 3722, C0X22 |
Double-skin Insulated (exterior skin 27 ga. min.; interior skin 27 ga. min.) WINDCODE® W5 Sectional Door, up to 14’2” wide
|
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +30 PSF/-34 PSF
Other: The OPTIONAL glazing available for this product meets the wind load requirements of the building code but DOES NOT meet the impact resistant requirement for windborne debris regions. The product without glazing DOES comply with the impact resistant requirement for windborne debris regions (ref 1609.1.4 FBC).
|
Installation Instructions
FL5678_R8_II_104044-Rev06.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_CCER_230725.pdf
Created by Independent Third Party: No |
|
|
| 5678.17 |
17 W5-08 C-PAN-1E448: 524, 524V, 524S, 520, 520S, 224, 224S, C4ST C4SV, C4SS, C0ST, C0SS |
Ribbed Steel (min. 24 ga.) WINDCODE® W5 Sectional Door, up to 8’2” wide
|
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +30 PSF/-30 PSF
Other: The OPTIONAL glazing available for this product meets the wind load requirements of the building code but DOES NOT meet the impact resistant requirement for windborne debris regions. The product without glazing DOES comply with the impact resistant requirement for windborne debris regions (ref 1609.1.4 FBC).
|
Installation Instructions
FL5678_R8_II_101874-Rev13.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_CCER_230725.pdf
Created by Independent Third Party: No |
|
|
| 5678.18 |
18 W5-10 C-PAN-1E448: 524, 524V, 524S, 520, 520S, 224, 224S, C4ST C4SV, C4SS, C0ST, C0SS |
Ribbed Steel (min. 24 ga.) WINDCODE® W5 Sectional Door, 8’4” to 10’2” wide
|
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +30 PSF/-30 PSF
Other: The OPTIONAL glazing available for this product meets the wind load requirements of the building code but DOES NOT meet the impact resistant requirement for windborne debris regions. The product without glazing DOES comply with the impact resistant requirement for windborne debris regions (ref 1609.1.4 FBC).
|
Installation Instructions
FL5678_R8_II_101875-Rev12.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_CCER_230725.pdf
Created by Independent Third Party: No |
|
|
| 5678.19 |
19 W5-12 C-PAN-1E448: 524, 524V, 524S, 520, 520S, 224, 224S, C4ST C4SV, C4SS, C0ST, C0SS |
Ribbed Steel (min. 24 ga.) WINDCODE® W5 Sectional Door, 10’4” to 12’2” wide
|
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +30 PSF/-30 PSF
Other: The OPTIONAL glazing available for this product meets the wind load requirements of the building code but DOES NOT meet the impact resistant requirement for windborne debris regions. The product without glazing DOES comply with the impact resistant requirement for windborne debris regions (ref 1609.1.4 FBC).
|
Installation Instructions
FL5678_R8_II_101869-Rev13.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_CCER_230725.pdf
Created by Independent Third Party: No |
|
|
| 5678.20 |
20 W5-16 C-PAN-1E448: 524, 524V, 524S, 520, 520S, 224, 224S, C4ST C4SV, C4SS, C0ST, C0SS |
Ribbed Steel (min. 24 ga.) WINDCODE® W5 Sectional Door, 12’4” to 16’2” wide
|
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +32 PSF/-32 PSF
Other: The OPTIONAL glazing available for this product meets the wind load requirements of the building code but DOES NOT meet the impact resistant requirement for windborne debris regions. The product without glazing DOES comply with the impact resistant requirement for windborne debris regions (ref 1609.1.4 FBC).
|
Installation Instructions
FL5678_R8_II_DISCONTINUED_FL5678.pdf
Verified By: Scott Hamilton FL PE 63286
Created by Independent Third Party: No
Evaluation Reports
FL5678_R8_AE_DISCONTINUED_FL5678.pdf
Created by Independent Third Party: No |
