7807.1 |
Ironwood Shake |
Minimum 28 Gauge Steel, Max. 48" long by 12" Wide Panel Attached to Plywood Deck |
Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: No Design Pressure: +N/A/-72.5 Other: The required design wind loads shall be determined for each project per FBC, 2004, Section 1603.1.4. Any rational analysis computations shall be prepared by a qualified design professional, as required by FBC, Section 105 or 106. The maximum fastener spacing listed herein shall not be exceeded. |
Installation Instructions FL7807_R0_II_Fl7807.1-IronwoodShake-Ply-INSTALLATION.pdf Verified By: James L. Buckner, P.E. @ C-Buck, Inc. P.E. #31242 Created by Independent Third Party: Evaluation Reports FL7807_R0_AE_FL7807.1-IronwoodShake-Ply-EVALREPORT.pdf Created by Independent Third Party: |