|
|
| 2847.1 |
Lomanco Lo-OmniRidge LOR9-4; TRI-BUILT Lo-OmniRidge LOR9-4 |
Gun Nailable 4' Ridge Vent for 9" Cap Shingles |
Limits of Use
Approved for use in HVHZ: Yes
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: N/A
Other: 1. Refer to applicable building codes for required ventilation.
2. Ridge Vent shall not be installed on roof hips.
3. Ridge Vent shall not be connected at ridge intersection, nor within 12" of any side wall or roof protrusion, with a ventilation slot clearance of 12" from such obstructions.
4. Ridge Vent shall not be installed on roof mean heights greater than 33 feet. |
Installation Instructions
FL2847_R18_II_23060503.pdf
Verified By: Miami-Dade BCCO - EVL
Created by Independent Third Party:
Evaluation Reports
FL2847_R18_AE_23060503.pdf |
|
|
| 2847.2 |
Lomanco Lo-OmniRoll LOR-30; TRI-BUILT Lo-OmniRoll LOR-30 |
60" Gun Nailable Shingle Over Ridge Vent (Sold as 30' roll - six 60" vents are welded together.) |
Limits of Use
Approved for use in HVHZ: Yes
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: N/A
Other: 1. Refer to applicable building codes for required ventilation.
2. OmniRidge Vent shall not be installed on roof mean heights greater than 33 feet. |
Installation Instructions
FL2847_R18_II_23053001.pdf
Verified By: Miami-Dade BCCO - EVL
Created by Independent Third Party:
Evaluation Reports
FL2847_R18_AE_23053001.pdf |
|
|
| 2847.3 |
OmniRidge OR-4 |
4' Shingle Over Ridge Vent |
Limits of Use
Approved for use in HVHZ: Yes
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: N/A
Other: 1. Refer to applicable building codes for required ventilation. 2. OmniRidge Vent shall not be installed on roof mean heights greater than 33 feet. |
Installation Instructions
FL2847_R18_II_21032308.pdf
Verified By: Miami-Dade BCCO - EVL
Created by Independent Third Party:
Evaluation Reports
FL2847_R18_AE_21032308.pdf |
