|
|
| 21955.1 |
FeelSafe H3 2.0 Awning |
FeelSafe H3 2.0 Awning 2-Wide w/FeelSafe H3 2.0 Picture Stacked (47.25"/47.25"x35.5" w94.5"x43.88 Stack) |
Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: Yes Design Pressure: +50/-60 Other: Qualifies as mull or individual; requires 1/4" mull plate & clips; Awning IG TypeLL (1"insul-3.1mmAN/.090"PVB/3.1mmAN;13mm XL Edge;3.1mmAN Int Lite) Picture typeMM (1"Insul-3.9mmAN;.090"SGP;3.9mmAN;9.8mmXL Edge;4.7mmAN IntLite); Complies with ASTM@1300. Products installed within 3,000ft (914m) of a saltwater coastline, fasteners shall comply with Section 1711.1.1 and connectors shall comply with Section 1711.1.2 as stated in FBC Edition 9, 2026 |
Certification Agency Certificate FL21955_R4_C_CAC_Sierra436CCL 436-H-659.25-27.pdf Quality Assurance Contract Expiration Date 10/05/2027 Installation Instructions FL21955_R4_II_H3 2.0 Feelsafe 2 wide-Awning_1 wide Picture above 95x80 CCL_436-H-659.25 ESP024129P_2073 14.pdf Verified By: Window and Door Manufacturer Association Created by Independent Third Party: Evaluation Reports Created by Independent Third Party: |
|
|
| 21955.2 |
FeelSafe H3 2.0 Awning |
FeelSafe H3 2.0 Awning w/FeelSafe H3 2.0 Picture Stacked (47.5"x35.5" w/47.5"x71.5" Stack |
Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: No Design Pressure: +50/-60 Other: Qualifies as mulled combination or individual units; Requires 1/4" aluminum mull plate and mull clips; Complies with ASTM E1300 requirements.When products are installed in areas within 3,000 ft (914 m) of a saltwater coastline, fasteners shall comply with Section 1711.1.1 and connectors shall comply with Section 1711.1.2 as stated in FBC Edition 9, 2026. |
Certification Agency Certificate FL21955_R4_C_CAC_Sierra436CCL_436-H-659.28[1].pdf Quality Assurance Contract Expiration Date 10/05/2027 Installation Instructions FL21955_R4_II_H3 2.0 Feelsafe Awning-Picture 1-Wide 2-High 47.5x107.25 CCL_436-H-659.28 ESP024129P_2073 17.pdf Verified By: Window and Door Manufacturer Association Created by Independent Third Party: Evaluation Reports Created by Independent Third Party: |