|
|
| 21154.1 |
H3 2.0 Casement |
H3 2.0 Casement 3-Wide Oper/Pict/Oper 118"x72" (30"/60"/30"x72") (Standard) |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +35/-35
Other: Maximum frame size 118"x72"(2985mmx1816mm); Complies with ASTM E1300 requirements.
When products are installed in areas within 3,000 ft (914 m) of a saltwater coastline, fasteners shall comply with Section 1711.1.1 and connectors shall comply with Section 1711.1.2 as stated in FBC Edition 9, 2026. |
Certification Agency Certificate
FL21154_R4_C_CAC_CCL 436-H-660.109.pdf
Quality Assurance Contract Expiration Date
12/30/2027
Installation Instructions
FL21154_R4_II_H3 2.0 CA OP 3-WIDE 118x72 CCL 436-H-660_4647 ESP022825P-1937 rev.10-23-2023.pdf
Verified By: Window and Door Manufacturer Association
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party: |
|
|
| 21154.2 |
H3 2.0 Casement |
H3 2.0 Casement 3-Wide Oper/Pict/Oper 118"x72" (30"/60"/30"x72") (HP) |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +50/-55
Other: Maximum frame size 118"x72" (2985mmx1816mm); Masonry clip at head and sill of each mull post; Complies with ASTM E1300 requirement.
When products are installed in areas within 3,000 ft (914 m) of a saltwater coastline, fasteners shall comply with Section 1711.1.1 and connectors shall comply with Section 1711.1.2 as stated in FBC Edition 9, 2026. |
Certification Agency Certificate
FL21154_R4_C_CAC_CCL 436-H-660.47.pdf
Quality Assurance Contract Expiration Date
09/28/2027
Installation Instructions
FL21154_R4_II_H3 2.0 CA OP 3-WIDE 118x72 CCL 436-H-660_4647 ESP022825P-1937 rev.10-23-2023.pdf
Verified By: Window and Door Manufacturer Association
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party: |
|
|
| 21154.3 |
Vinyl Casement |
8000 Vinyl Casement 2-Wide Operator/Fixed w/Single Transom 70"x95" (24"/48"x60 w/stack 70"x35") |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +50/-65
Other: Maximum frame size of 70"x95" (1788mmx2413mm); 2-piece aluminum reinforced horizontal mull; Complies with ASTM E1300 requirements.
When products are installed in areas within 3,000 ft (914 m) of a saltwater coastline, fasteners shall comply with Section 1711.1.1 and connectors shall comply with Section 1711.1.2 as stated in FBC Edition 9, 2026. |
Certification Agency Certificate
FL21154_R4_C_CAC_448-004.12.pdf
Quality Assurance Contract Expiration Date
03/22/2029
Installation Instructions
FL21154_R4_II_SS 8000 Vinyl CA OP PIC 2-W Trnsm Stack CCL 448-H-004_12 ESP018263P-1640 REV A.pdf
Verified By: Window and Door Manufacturer Association
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party: |
