|
|
| 21152.1 |
H3 2.0 Awning |
H3 2.0 Awning 2-Wide 95"x48" (2-wide 48"x48") (Standard) |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +35/-35
Other: Maximum frame size of 95"x48" (2400mmx1207mm); Complies with ASTM E1300 requirements. When products are installed in areas within 3,000 ft (914 m) of a saltwater coastline, fasteners shall comply with Section 1711.1.1 and connectors shall comply with Section 1711.1.2 as stated in FBC Edition 9, 2026. |
Certification Agency Certificate
FL21152_R4_C_CAC_CCL 436-H-659.12.pdf
Quality Assurance Contract Expiration Date
01/13/2028
Installation Instructions
FL21152_R4_II_H3 2 0 Awning OP 2-WIDE 95x48 CCL 436-H-659_12 14 ESP023257P-1988.pdf
Verified By: Window and Door Manufacturer Association
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party: |
|
|
| 21152.2 |
H3 2.0 Awning |
H3 2.0 Awning 2-Wide 95"x48" (2-wide 48"x48") (HP) |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +45/-60
Other: Maximum frame size of 95"x48" (2400mmx1207mm); Complies with ASTM E1300 requirements. When products are installed in areas within 3,000 ft (914 m) of a saltwater coastline, fasteners shall comply with Section 1711.1.1 and connectors shall comply with Section 1711.1.2 as stated in FBC Edition 9, 2026. |
Certification Agency Certificate
FL21152_R4_C_CAC_CCL 436-H-659.14.pdf
Quality Assurance Contract Expiration Date
01/13/2028
Installation Instructions
FL21152_R4_II_H3 2 0 Awning OP 2-WIDE 95x48 CCL 436-H-659_12 14 ESP023257P-1988.pdf
Verified By: Window and Door Manufacturer Association
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party: |
|
|
| 21152.3 |
H3 2.0 Awning |
H3 2.0 Awning Single 48"x48" |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +50/-50
Other: Maximum frame size 48"x48" (1207mmx1207mm); Complies with ASTM E1300 requirements. When products are installed in areas within 3,000 ft (914 m) of a saltwater coastline, fasteners shall comply with Section 1711.1.1 and connectors shall comply with Section 1711.1.2 as stated in FBC Edition 9, 2026. |
Certification Agency Certificate
FL21152_R4_C_CAC_CCL 436-H-659.10.pdf
Quality Assurance Contract Expiration Date
10/05/2027
Installation Instructions
FL21152_R4_II_H3 2.0 Awning OP 48x48 CCL 436-H-659_10 ESP022489P_1907.pdf
Verified By: Window and Door Manufacturer Association
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party: |
