|
|
| 15396.1 |
Wood In-swing Door |
Wood In-swing In-swing Double Door with multi-point lock hardware (Frame Size 72” x 106_1/4”) |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +40/-40
Other: Glass shall conform to the current ASTM E1300 standard & be safety rated. These doors are not approved for use where the water infiltration resistance required exceeds a positive design pressure of +20 psf. Unless units are installed in non-habitable areas where the unit & the area are designed to accept water infiltration, units shall be installed only at locations protected by a canopy or overhang where-by the overhang (OH) ratio is equal to or more than 1.0 per FBC section 1715.5. |
Certification Agency Certificate
FL15396_R6_C_CAC_NI010951-R6.pdf
Quality Assurance Contract Expiration Date
12/31/2026
Installation Instructions
FL15396_R6_II_Drawing 1808.pdf
Verified By: Warren W. Schaefer PE 44135
Created by Independent Third Party: Yes
Evaluation Reports
FL15396_R6_AE_Drawing 1808.pdf
Created by Independent Third Party: Yes |
|
|
| 15396.2 |
Wood In-swing Door |
Wood In-swing Single Door with multi-point lock hardware (Frame Size 36_3/8” x 106_1/4”) |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +40/-40
Other: Glass shall conform to the current ASTM E1300 standard & be safety rated. These doors are not approved for use where the water infiltration resistance required exceeds a positive design pressure of +20 psf. Unless units are installed in non-habitable areas where the unit & the area are designed to accept water infiltration, units shall be installed only at locations protected by a canopy or overhang where-by the overhang (OH) ratio is equal to or more than 1.0 per FBC section 1715.5. |
Certification Agency Certificate
FL15396_R6_C_CAC_NI010951-R6.pdf
Quality Assurance Contract Expiration Date
12/31/2026
Installation Instructions
FL15396_R6_II_Drawing 1808.pdf
Verified By: Warren W. Schaefer PE 44135
Created by Independent Third Party: Yes
Evaluation Reports
FL15396_R6_AE_Drawing 1808.pdf
Created by Independent Third Party: Yes |
