|
|
| 17437.1 |
1 - "FW-12" Wall/Soffit Panel with Seamlock |
Structural steel wall/soffit or aluminum wall panels with concealed fasteners, a flush seam and interlocking seam edge with seam lock feature designed to resist panel disengagement. |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +N/A/-Table A
Other: Refer to Limitations and Conditions of Use on Evaluation Report. Refer to manufacturer’s installation instructions as a supplemental guide for attachment. |
Installation Instructions
FL17437_R4_II_1_FW12_WallSoffit_EVALREPORT.pdf
Verified By: James L. Buckner, P.E. PE #31242
Created by Independent Third Party: Yes
Evaluation Reports
FL17437_R4_AE_1_FW12_WallSoffit_EVALREPORT.pdf
Created by Independent Third Party: Yes |
|
|
| 17437.2 |
2 - "HR-16" Panel |
Structural aluminum or steel wall panels with concealed fasteners, a flush seam and interlocking seam edge. Panels are attached to steel supports with screws. |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +Table A/-Table A
Other: Refer to Limitations and Conditions of Use on Evaluation Report. Refer to manufacturer’s installation instructions as a supplemental guide for attachment. |
Installation Instructions
FL17437_R4_II_2_HR16_Wall_EVALREPORT_.pdf
Verified By: James L. Buckner, P.E. PE #31242
Created by Independent Third Party: Yes
Evaluation Reports
FL17437_R4_AE_2_HR16_Wall_EVALREPORT_.pdf
Created by Independent Third Party: Yes |
|
|
| 17437.3 |
3 - "HS-12" Panel |
Structural aluminum wall panels with concealed fasteners, a flush seam, wide rib appearance and an interlocking seam edge. Panels may be installed horizontally or vertically to steel supports. |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +N/A/-Table A
Other: Refer to Limitations and Conditions of Use on Evaluation Report. Refer to manufacturer’s installation instructions as a supplemental guide for attachment. |
Installation Instructions
FL17437_R4_II_3_HS12_AlumWall_EVALREPORT.pdf
Verified By: James L. Buckner, P.E. PE #31242
Created by Independent Third Party: Yes
Evaluation Reports
FL17437_R4_AE_3_HS12_AlumWall_EVALREPORT.pdf
Created by Independent Third Party: Yes |
|
|
| 17437.4 |
4 - "HS-8" Panel |
Structural aluminum wall panels with concealed fasteners, a flush seam, wide rib appearance and an interlocking seam edge. Panels may be installed horizontally or vertically to steel supports. |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +N/A/-Table A
Other: Refer to Limitations and Conditions of Use on Evaluation Report. Refer to manufacturer’s installation instructions as a supplemental guide for attachment. |
Installation Instructions
FL17437_R4_II_4_HS8_AlumWall_EVALREPORT.pdf
Verified By: James L. Buckner, P.E. PE #31242
Created by Independent Third Party: Yes
Evaluation Reports
FL17437_R4_AE_4_HS8_AlumWall_EVALREPORT.pdf
Created by Independent Third Party: Yes |
|
|
| 17437.5 |
5 - "FW-1025" Panel with Optional Seamlock |
Structural aluminum wall/soffit panels with concealed fasteners, a flush seam and interlocking seam edge with optional seam lock feature designed to resist panel disengagement. |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +N/A/-SeeTable
Other: Refer to Limitations and Conditions of Use on Evaluation Report. Refer to manufacturer’s installation instructions as a supplemental guide for attachment. |
Installation Instructions
FL17437_R4_II_5_FW1025_WallSoffit_EVALREPORT.pdf
Verified By: James L. Buckner, P.E. @ CBUCK, Inc. P.E. 31242
Created by Independent Third Party: Yes
Evaluation Reports
FL17437_R4_AE_5_FW1025_WallSoffit_EVALREPORT.pdf
Created by Independent Third Party: Yes |
