|
|
| 1573.1 |
CertainTeed Vinyl Siding |
Vinyl Siding |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +N/A/-115.6
Other: 1.) This application shall not be used for soffit products. 2.) Refer to FBC Supplement for determination of design wind loads. 3.) DP noted in this application pertains to one system. Refer to Table 2 of the ICC-ESR for specific systems and associated Allowable Negative Wind Loads |
Installation Instructions
FL1573_R8_II_ESR-1066 10-24.pdf
Verified By: ICC Evaluation Service, LLC
Created by Independent Third Party:
Evaluation Reports
FL1573_R8_AE_ESR-1066 10-24.pdf |
|
|
| 1573.2 |
Restoration Millwork Exterior Trim and CertaTrim |
Rigid cellular PVC solid cross sections installed as trim pieces |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: +N/A/-55.0
Other: 1.) This application shall not be used for soffit products. 2.) Refer to FBC Supplement for determination of design wind loads. 3.) DP noted in this application pertains to one system. Refer to Section 4.3 of the ICC-ESR for specific systems and associated Allowable Negative Wind Loads. |
Installation Instructions
FL1573_R8_II_ESR-2922 02-24.pdf
Verified By: ICC Evaluation Service, LLC
Created by Independent Third Party:
Evaluation Reports
FL1573_R8_AE_ESR-2922 02-24.pdf |
|
|
| 1573.3 |
Vinyl Carpentry |
Vinyl Siding |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +N/A/-57.7
Other: 1.) This application shall not be used for soffit products. 2.) Refer to FBC Supplement for determination of design wind loads. 3.) DP noted in this application pertains to one system. Refer to Table 2 of the ICC-ESR for specific systems and associated Allowable Negative Wind Loads. |
Installation Instructions
FL1573_R8_II_ESR-1066 10-24.pdf
Verified By: ICC Evaluation Service, LLC
Created by Independent Third Party:
Evaluation Reports
FL1573_R8_AE_ESR-1066 10-24.pdf |
