|
|
| 5027.1 |
Master Flow® Ridge Vent Aluminum |
10' long aluminum ridge vent - in embossed mill finish and colors |
Limits of Use
Approved for use in HVHZ: Yes
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: N/A
Other: Master Flow® Ridge Vent Aluminum shall not be installed on roof mean heights greater than 33 feet per Miami-Dade NOA 22-0411.05. The Master Flow® Ridge Vent Aluminum complies with the HVHZ of the Florida Building Code.
All fasteners must comply with the corrosion resistance requirements of the Florida Building Code Section 1711. |
Installation Instructions
FL5027_R20_II_22-0411.05.pdf
Verified By: Miami-Dade BCCO - EVL
Created by Independent Third Party:
Evaluation Reports
FL5027_R20_AE_22-0411.05.pdf |
|
|
| 5027.2 |
Master Flow® Roof Louver SSB960 Metal Slant-Back - Aluminum (SSB960A) |
Static Roof Louver |
Limits of Use
Approved for use in HVHZ: Yes
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: N/A
Other: Master Flow® Roof Louver SSB960 Metal Slant-Back - Aluminum (SSB960A) shall not be installed on roof mean heights greater than 33 feet and are to be installed on asphaltic shingle roofing per Miami-Dade NOA 22-0929.04. The Master Flow® Roof Louvers comply with the HVHZ of the Florida Building Code. All fasteners must comply with the corrosion resistance requirements of the Florida Building Code Section 1711. |
Installation Instructions
FL5027_R20_II_22-0929.04.pdf
Verified By: Miami-Dade BCCO - EVL
Created by Independent Third Party:
Evaluation Reports
FL5027_R20_AE_22-0929.04.pdf |
|
|
| 5027.3 |
Master Flow® Wind Turbine Galvanized Externally Braced |
12" galvanized Turbine Roof Ventilator (externally braced in mill finish and in colors) |
Limits of Use
Approved for use in HVHZ: Yes
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: N/A
Other: Master Flow® Wind Turbine Galvanized Externally Braced shall not be installed on roof mean heights greater than 33 feet and these vents are approved for asphaltic shingle roofing per Miami-Dade NOA 22-0411.04. The Master Flow® Wind Turbine Galvanized Externally complies with the HVHZ of the Florida Building Code. All fasteners must comply with the corrosion resistance requirements of the Florida Building Code Section 1711. |
Installation Instructions
FL5027_R20_II_22-0411.04.pdf
Verified By: Miami-Dade BCCO - EVL
Created by Independent Third Party:
Evaluation Reports
FL5027_R20_AE_22-0411.04.pdf |
