|
|
| 14696.1 |
Contemporary Collection, Direct Set, 90 Degree (8306) |
LC-PG40-1245/1245x3035 |
Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: No Design Pressure: +40/-40 Other: Glazing consists of 3/4" Insul thickness produced with two lites of 1/4" (5.7mm) annealed lites. Glass complies with E1300 requirements. |
Certification Agency Certificate FL14696_R14_C_CAC_449-H-005 .61 62 8306 Direct Set 90 degree Corner 49x49x119.5.pdf Quality Assurance Contract Expiration Date 03/20/2035 Installation Instructions FL14696_R14_II_45-45595 rev 1.pdf Verified By: Window and Door Manufacturer Association Created by Independent Third Party: Evaluation Reports Created by Independent Third Party: |
|
|
| 14696.2 |
Contemporary Collection, Direct Set, 90 Degree (8306) |
CW-PG50-1549/1549x2438 |
Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: No Design Pressure: +50/-50 Other: Glazing consists of 3/4" Insul thickness produced with two lites of 1/4" (5.7mm) annealed lites. Glass complies with E1300 requirements. |
Certification Agency Certificate FL14696_R14_C_CAC_449-H-005 .59 60 8306 Direct Set 90 degree Corner 61x61x96.pdf Quality Assurance Contract Expiration Date 03/28/2035 Installation Instructions FL14696_R14_II_45-45595 rev 1.pdf Verified By: Window and Door Manufacturer Association Created by Independent Third Party: Evaluation Reports Created by Independent Third Party: |
|
|
| 14696.3 |
Premium Picture Window (8211) |
CW-PG45-1816x2426 (72X96)-FW |
Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: No Design Pressure: +45/-45 Other: Glazing consists of 3/4" Insul thickness produced with two lites of 1/4" (5.7mm) annealed lites. Glass complies with E1300 requirements. |
Certification Agency Certificate FL14696_R14_C_CAC_449-H-018.28.,.29,.30,.31 8211 Casement Picture and 2 wide.pdf Quality Assurance Contract Expiration Date 02/05/2034 Installation Instructions FL14696_R14_II_85-7438-29 8211 Twin Picture rev 1.pdf Verified By: Window and Door Manufacturer Association Created by Independent Third Party: Evaluation Reports Created by Independent Third Party: |
|
|
| 14696.4 |
Premium Picture Window (8211), 2-Wide Mulled Assembly, Mullion |
LC-PG45-2426/1816 (96SP/72TW)-FW individual frame 71.5x96 overall 143-1/16" x 95-1/2" |
Limits of Use Approved for use in HVHZ: No Approved for use outside HVHZ: Yes Impact Resistant: No Design Pressure: +45/-45 Other: Glazing consists of 3/4" Insul thickness produced with two lites of 1/4" (5.7mm) annealed lites. Glass complies with E1300 requirements. |
Certification Agency Certificate FL14696_R14_C_CAC_449-H-018.28.,.29,.30,.31 8211 Casement Picture and 2 wide.pdf Quality Assurance Contract Expiration Date 02/05/2034 Installation Instructions FL14696_R14_II_85-7438-29 8211 Twin Picture rev 1.pdf Verified By: Window and Door Manufacturer Association Created by Independent Third Party: Evaluation Reports Created by Independent Third Party: |
|
|
| 14696.5 |
Twin Premium Impact Picture Window, Alternate Glass (1209,1210), Vertical Mullion |
CW-PG55-3645x2121 (144x84) |
Limits of Use Approved for use in HVHZ: Yes Approved for use outside HVHZ: Yes Impact Resistant: Yes Design Pressure: +55/-70 Other: 1" insulated glass comprised of 8mm tempered/ 6.3mm Super Spacer/ 4.7mm /.090" SGP /4.7mm annealed glass and 23/32" Cardinal LG lami glass comprised of 5/16" annealed / .090" SGP / 5/16" annealed glass. Glass was set from the interior against silicone back bedding with additional silicone in the glazing pocket. Glass meets ASTM E1300. Fasteners, anchors, and connectors shall comply with 2026 Florida Building Code Section 1711 corrosion resistance requirements. |
Certification Agency Certificate FL14696_R14_C_CAC_449-H-018.11,13,14,15 1209 Premium Impact Casement Picture.pdf Quality Assurance Contract Expiration Date 11/06/2029 Installation Instructions FL14696_R14_II_23648-1-1001 1209 Fixed Casement (Rev 1).pdf FL14696_R14_II_23648-1-1002 1210 Fixed Casement (Rev 1).pdf Verified By: Window and Door Manufacturer Association Created by Independent Third Party: Evaluation Reports Created by Independent Third Party: |