|
|
| 37138.1 |
TremLock "R" Panel |
Through-fastened metal roof panel over open framing. |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +0/-52.5
Other: Refer to posted UL Constructions for attachment requirements. Minimum roof slope shall be the greater of 2:12 (17-percent slope) or the limitations set forth in FBC 1507.4.2. Coil sheet used to fabricate the metal panels shall comply with FBC 1507.4.3. Fasteners shall be as specified in the UL Constructions, limited per FBC 1507.4.4. Diaphragm load is outside the scope of this Method 1A submittal. |
Certification Agency Certificate
FL37138_R3_C_CAC_TGKX.161.pdf
FL37138_R3_C_CAC_TGKX.167.pdf
Quality Assurance Contract Expiration Date
04/07/2028
Installation Instructions
FL37138_R3_II_TGKX.161.pdf
FL37138_R3_II_TGKX.167.pdf
Verified By: UL LLC
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party: |
|
|
| 37138.2 |
TremLock T-238 |
T-panel, standing seam metal roof over open framing |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +0/-52.5
Other: Refer to posted UL Constructions for attachment requirements. Minimum roof slope shall be the greater of 2:12 (17-percent slope) or the limitations set forth in FBC 1507.4.2. Coil sheet used to fabricate the metal panels shall comply with FBC 1507.4.3. Fasteners shall be as specified in the UL Constructions, limited per FBC 1507.4.4. Diaphragm load is outside the scope of this Method 1A submittal. |
Certification Agency Certificate
FL37138_R3_C_CAC_TGKX.268.pdf
Quality Assurance Contract Expiration Date
04/07/2028
Installation Instructions
FL37138_R3_II_TGKX.268.pdf
Verified By: UL LLC
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party: |
|
|
| 37138.3 |
TremLock VP1.5 |
Vertical-leg, standing seam metal roof over open framing. |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +0/-52.5
Other: Refer to posted UL Constructions for attachment requirements. Minimum roof slope shall be the greater of 2:12 (17-percent slope) or the limitations set forth in FBC 1507.4.2. Coil sheet used to fabricate the metal panels shall comply with FBC 1507.4.3. Fasteners shall be as specified in the UL Constructions, limited per FBC 1507.4.4. Diaphragm load is outside the scope of this Method 1A submittal. |
Certification Agency Certificate
FL37138_R3_C_CAC_TGKX.506C.pdf
Quality Assurance Contract Expiration Date
04/07/2028
Installation Instructions
FL37138_R3_II_TGKX.506C.pdf
Verified By: UL LLC
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party: |
|
|
| 37138.4 |
TremLock VP212, VP216, VP218 and VP180 |
Vertical-leg, mechanically-seamed, standing seam metal roof over open framing |
Limits of Use
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
Design Pressure: +0/-52.5
Other: Refer to posted UL Constructions for attachment requirements. Minimum roof slope shall be the greater of 2:12 (17-percent slope) or the limitations set forth in FBC 1507.4.2. Coil sheet used to fabricate the metal panels shall comply with FBC 1507.4.3. Fasteners shall be as specified in the UL Constructions, limited per FBC 1507.4.4. Diaphragm load is outside the scope of this Method 1A submittal. |
Certification Agency Certificate
FL37138_R3_C_CAC_TGKX.506.pdf
Quality Assurance Contract Expiration Date
04/07/2028
Installation Instructions
FL37138_R3_II_TGKX.506.pdf
Verified By: UL LLC
Created by Independent Third Party:
Evaluation Reports
Created by Independent Third Party: |
