FLORIDA BUILDING COMMISSION

 

 

FACILITATOR’S SUMMARY REPORT OF THE

DECEMBER 15, 2008

TELECONFERENCE RULE DEVELOPMENT WORKSHOPS ON RULE 9B-72.090 AND 9B-72.180

 

 

Meeting Design & Facilitation By

 

Consensus Solutions

 

Report By Jeff A. Blair

FCRC Consensus Center

Florida Conflict Resolution Consortium

Florida State University

 

fsulogo51b

 

mailto:jblair@fsu.edu

http:// consensus.fsu.edu

 

 

This document is available in alternate formats upon request to Dept. of Community Affairs, Codes & Standards, 2555 Shumard Oak Blvd., Tallahassee, FL 32399, (850) 487-1824.


FLORIDA BUILDING COMMISSION

 

DECEMBER 15, 2008 TELECONFERENCE MEETING REPORT

 

MONDAY, DECEMBER 15, 2008

Opening and Meeting Attendance

The workshop was opened at 10:00 AM, and the following Commissioners participated:

 

Raul L. Rodriguez, AIA, Chair, Dick Browdy, Matthew Carlton, Ed Carson, Herminio Gonzalez, Jim Goodloe, Ken Gregory, Tony Grippa, Jon Hamrick, Paul Kidwell, Scott Mollan, Bill Norkunas, Jim Schock, Chris Schulte, Jeff Stone, Drew Smith, John “Tim” Tolbert, Mark Turner, and

Randall Vann.

DCA Staff Present

Joe Bigelow, Jon Caudill, Rick Dixon, Ila Jones, Azhar Khan, Mo Madani, and Jim Richmond.

 

Meeting Facilitation

The meeting was facilitated by Jeff Blair from the Florida Conflict Resolution Consortium at Florida State University. Information at: http://consensus.fsu.edu/

 

 

Rule Development Workshop on Rule 9B-72.090

Jeff Blair, Commission Facilitator, explained that the Commission’s Product Approval POC provided written comments regarding Rule 9B-72.090 as follows:

 

Change the Building Code Information System (BCIS) to allow the upload of an attachment for the self-affirmation method in the Building Code Information System. This will allow evaluating engineers to submit additional documentation to demonstrate compliance with subsequent versions of the Code.

 

The Rule Development Workshop was opened and an opportunity was presented for public comment. At the conclusion of public comment an opportunity was offered for Commission discussion, and then the Commission took the following action:

Commission Actions:

Motion—The Commission voted unanimously, 19 – 0 in favor, to allow the upload of an attachment for the self-affirmation method in the Building Code Information System, providing a method for the entity or individual who originally certified that the product complied with the requirement of one Edition of the Code complies with the Updated Edition of the Code, and to proceed with Rule Adoption on Rule 9B-72.090 by conducting a Rule Adoption Hearing at the February 2009 Commission meeting.


Rule Development Workshop on Rule 9B-72.180

Jeff Blair, Commission Facilitator, explained that the Commission’s Product Approval POC and Structural TAC provided written comments regarding Rule 9B-72.180 as follows:

 

The POC and TAC have reviewed the following standards and recommend the Commission amend Rule 9B-72.180 to recognize them as equivalent to the revised editions:

 

ANSI/DASMA108-02 Standard Method for Testing Sectional Garage Doors and Rolling Doors: Determination of Structural Performance under Uniform Static Air Pressure Difference is equivalent to ANSI/DASMA 108-05;

TPI 1-02 National Design Standards for Metal-Plate-Connected Wood Truss Construction is equivalent to TPI 1-07; and,

ASTM E 1300-02 Practice for Determining Load Resistance of Glass in Buildings is equivalent to ASTME E 1300-04.

 

The Rule Development Workshop was opened and an opportunity was presented for public comment. At the conclusion of public comment an opportunity was offered for Commission discussion, and then the Commission took the following action:

Commission Actions:

Motion—The Commission voted unanimously, 19 – 0 in favor, to recognize the following standards as equivalent:

ANSI/DASMA108-02 Standard Method for Testing Sectional Garage Doors and Rolling Doors: Determination of Structural Performance under Uniform Static Air Pressure Difference is equivalent to ANSI/DASMA 108-05;

TPI 1-02 National Design Standards for Metal-Plate-Connected Wood Truss Construction is equivalent to TPI 1-07; and,

ASTM E 1300-02 Practice for Determining Load Resistance of Glass in Buildings is equivalent to ASTME E 1300-04; and, to proceed with Rule Adoption on Rule 9B-72.180 by conducting a Rule Adoption Hearing at the February 2009 Commission meeting.

 

 

Adjourn

The Commission voted unanimously, 19 – 0 in favor, to adjourn at approximately 11:00 AM.